Category Archives: Business Products & Services

The composition of LED strip lights

LED strip lights are now one of the lamps we often use. This article mainly explains the main components of commonly used strip lights and how to identify high-quality strip light products.
To get a good price when buying strip lights, when looking for LED Strip Light Wholesale, it is necessary to choose merchants with rich experience and longer business hours. They have more experience and also have related accessories, such as LED Power Supply, LED module Supplier, etc.
High voltage strip light
The composition of high-voltage strip lights
The so-called high-voltage strip lights are strip lights whose input is 220V mains power. Of course, you cannot directly connect it to AC 220V. You also need to connect a power plug, as shown below.

The structure inside this power supply head is extremely simple. It is a rectifier bridge stack that rectifies AC mains power into non-standard DC power. LED is a semiconductor and requires direct current. 1. Flexible lamp bead board
The most important part is to attach an appropriate number of LED chip beads and current-limiting resistors to the flexible circuit board.
We know that the voltage of a single LED lamp bead is between 3-5V; then if more than 60 lamp beads are strung together, the voltage can reach about 200V, which is close to the mains voltage of 220V, plus the resistor current limiting , the LED lamp bead board can work normally after being connected to the rectified AC power.
More than 60 (of course there are 120 or 240, just connected in parallel) lamp beads are strung together, and the length is close to one meter. Therefore, high-voltage strip lights are generally cut into one-meter sections.
The quality requirement for flexible circuit boards is to ensure the current load of a single string of strip lights within one meter. Since the current of a single string is generally at the milliamp level, the copper thickness requirements for high-voltage flexible boards do not need to be very high, and single-layer single panels are more commonly used. 2. Wires
What connects every meter of strip light is a wire. When the wire is running high-voltage DC, the voltage drop is very small compared to the 12V or 24V low-voltage lamp. This is why high-voltage strip lights can be rolled up to 50 meters or even 100 meters. The wires embedded on both sides of the high-voltage lamp strip transmit high-voltage power to each string of flexible lamp bead boards.
The quality of the wire is very important for the entire high-voltage strip light. Generally, the wires of high-quality high-voltage lamp strips are made of copper wire, and the cross-sectional area will be relatively thick, which is sufficient compared to the total power of the high-voltage lamp strip.
However, cheap and low-quality high-voltage strip lights will not use copper wires, but copper-clad aluminum wires, or directly aluminum wires, or even iron wires. The brightness and power of this kind of strip light are naturally not very high, and the chance of the wires being burned out due to overload is also quite high. We advise everyone to avoid buying this type of strip light. 3. Potting glue
The wires of high-voltage lamp strips run on high-voltage electricity, which may be dangerous if encountered, so the insulation must be done well. The general approach is to encapsulate transparent PVC plastic.
This kind of plastic has good light transmission, light weight, good plasticity, and good insulation and thermal insulation properties. With this layer of protection, high-voltage strip lights can be used safely, and can even be used outdoors, no matter the wind or rain.
Knock on the blackboard! Here’s a little trivia: Because the performance issues of transparent PVC plastic are not air after all, there will definitely be attenuation of the brightness of the strip lights. This is not the problem. The difficulty is that it also affects the correlated color temperature of the strip light, which is a headache-inducing color temperature drift. Generally speaking, it will drift higher by 200-300K. For example: If you use a lamp bead board with a color temperature of 2700K, the color temperature after potting may reach 3000K. If you make it with a color temperature of 6500K, it will reach 6800K or 7000K after potting. 4. New constant current chip high voltage strip light
With the rapid development of LED drivers and integrated circuits, high-voltage constant current ICs have been used in high-voltage LED strip lights.
What is an IC? It means integrated circuit. Generally speaking, they are small rectangular black blocks with 4-8 pins on them (there are also 16 and 32 pins. It can be considered that the more pins, the more powerful the function. How about counting how many pins your computer CPU has? ).
With the help of these ICs, high-voltage strip lights have become much more stable. Even if the mains power is unstable, such as high peak voltage, grid pollution, etc., the LED strip light can still work normally. Moreover, the emergence of high-voltage LED lamp beads (SMD lamp beads with a voltage drop greater than 3-5V at both ends, which are actually nothing more than multiple lamp bead chips connected in series on a lamp bead package) can also make high-voltage lamp strips not limited to Cut out one meter at a time. Nowadays, there are also high-voltage strip lights that can be cut into 10cm length.

How to identify good quality high voltage strip lights?
Judging from the material:
Use good quality lamp beads, resistors, and flexible boards with thick copper skin. How to identify high-quality LED lamp beads? This can be discussed in another article. Pure copper wires are used, and the wire cross-section is large. Try not to choose copper-clad aluminum, or even aluminum or iron wire. How to tell if it is copper wire? You can also refer to another article. When looking at the potting glue, it requires high transparency, good softness, uniform potting, and no odor. The power head using a large chip bridge stack is less likely to burn out the lamp beads. Because the bridge stack has a current limit, such as 4A, 6A. If a small-chip bridge stack is used, overcurrent will easily result in burning out the power inlet. When using, try not to fold the strip light repeatedly. Folding the strip light not only prevents the heat from dissipating from the strip light, but can also easily cause the high-voltage line to deform or the lamp bead pad on the flexible plate to fall off, causing the strip light to not light up or burn out.
Distinguish from the optical parameters and power:
The larger the LED chip, the larger the margin left when using the lamp beads, the better the light effect will be and the service life will be longer.
Regarding light parameters, a good strip light needs to have the following items:
High luminous flux, preferably high light efficiency. Light efficiency is the amount of luminous flux produced per unit of power consumption. High luminous flux can be achieved by increasing the unit power of the lamp bead, but to ensure high luminous efficiency at the same time, the lamp bead chip must be a large chip to have the best of both worlds. It has accurate, stable correlated color temperature and low color tolerance. This will make the strip light look very uniform in color and brightness. Have a high color rendering index, such as 80 or above 90. The color rendering index is the fraction that restores the original color of an object. 100 means 100% restoration of the color of objects under the sun. Of course, strip lights that are only used for backlight atmosphere effects do not require a high color rendering index, but as much luminous flux as possible. Because color rendering index and luminous flux are generally inversely proportional.

low voltage strip light
Types of low voltage strip lights
Low-voltage strip lights are mainly the flexible lamp bead boards mentioned in high-voltage strip lights, and are matched with different external materials to form many different types, including the following:
Bare board. Generally, double-sided adhesive tape is affixed to the back of the lamp bead board so that it can be easily fixed on the surface of various installation materials. Glue. Apply soft silicone on the front of the lamp bead board, and still apply double-sided adhesive tape on the back. This kind of epoxy strip light has slightly higher protection for the circuit and lamp beads than the bare board. Glue. Similar to the method of high-voltage lamp strips, the bare lamp bead boards are potted with resin or transparent PVC plastic on the top, bottom, left and right. In this way, it can achieve a good level of protection and can be used outdoors. casing. Cover the bare board strip light with a rectangular transparent silicone sleeve, and seal the plugs on both sides with silicone. Because silicone has superior properties compared to resin and PVC: more temperature-resistant, more stable, excellent resilience, less deformation, high insulation, etc. Moreover, the sealed casing strip light can also be used in outdoor scenes, and even has an IP67 protection level. Silica gel. Similar to a sleeve, but wrapped in thicker two-color silicone. White silicone is used to cover the circuit board, giving it a more beautiful appearance. Milky white silica gel is used to transmit light. This kind of light transmission can soften the individual LED lights and form a coherent strip light. It also has all the excellent features of the sleeve strip light, so it is of the best quality. One of the strip lights. Hard strip light. Generally speaking, there are two types of hard strip lights. One is that the material itself is not a flexible board, but a fiberglass board or an aluminum substrate. Therefore, it does not have the free bending function of flexible boards and is generally used in straight-line usage scenarios. The other is to stick the bare board of the flexible strip light onto the aluminum profile, and usually it is also equipped with a soft light PC cover to achieve a more uniform and softer light effect. Bare board with adhesive backing strip light

Stretch Film Machine

double layer stretch film machine
double layer stretch film machine
Automatic Stretch Film Rewinding Machine

 Double layer stretch film machine uses LLDPE as main material and adopts several kinds of resins to manufacture the single/double-side self-sticky stretch wrapping film. The film has good tensile strength,anti-pricking ability and impact strength. Its good shrinking memory function and self-sticky can make goods integrity to prevent goods from loosening and collapsing during transportation and being polluted by dust. The transparency and tensile strength of this product can make the packaging beautiful, economical and practical. The film can be widely used in wrapping of palletized goods. Its a good substitute for hot shrinking packaging film during transportation.   Technical Parameter:
Item/Model KD-500*2 KD-1000*2 Screw diameter(mm) 55*2 65 *2 L/D ratio of screw (L/D) 28:1 28:1 width of die head (mm) 650 1250 Width of finished products(mm) 500(250*2rollers) 1000(500*2rollers) Thickness of finished products (mm) 0.017-0.05 0.017-0.05 Structure of film layers A/B A/B Max output (kg/h) 40 100 Linear speed of machinery (m/min) 10-120 50-100 Total power (KW) 50 140 Overall dimensions (L*W*H)m 6*1.5*2.5 10*4*3 Weight (T)(About) 3 8 Optional Equipment:   1) Auto loader  2) Auto dry hopper  3) Motorize net changer  4) Hydraulic net changer  5) Air shaft  6) gule pump
   
           

CE Certificate

Kingdom Machine co.,ltd team professional produce rotogravure printing machine, blown film lines, blown film extrusion,bag making machine,flexo printing machine,stretch film machine,bubble film machine,recycle machine for over 15 years.

Kingdom Machine co,ltd
Mobile:0086-13088651008 

mobile:0086-13566179950
 kingdombillwang@hotmail.com 

kingdombillwang@yahoo.com 
http://www.gravureprintingmachine.com
http://www.blown-film-extruder.com
Ruian Economic Zone,Wenzhou,China 325200
 Tel.:0086-577-65127709

Fax:0086-577-56848008
Skype:kingdombillwang 

whatsapp:0086-13088651008
 viber:0086-13088651008

Tango:0086-13088651008